Overview
2GIG hardwire takeover module — converts existing 12 V wired burglary zones to wireless 345 MHz zones on the 2GIG panel (not for fire/CO hardwire).
On 2GIG systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.
At a Glance
| Specification | Details |
|---|---|
| Role | Wired zone takeover to wireless |
| Input | 12 V burglary loops — not fire or CO |
| Wireless | 345 MHz; encrypted TAKE1e available |
| Indoor | Listed for indoor use only |
What This Device Does Well
Provides reliable supervised status at the panel and Alarm.com when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Sensor SKU — standard 345 MHz vs eSeries encrypted vs ePlus 900 MHz.
- Panel online — resolve panel AC/cell trouble before blaming sensor.
- Range — repeaters (RPTR1) or transceivers (XCVR2) for distant zones.
- Battery type — use listed cell; replace all batteries in multi-cell devices.
- Tamper — cover fully closed before declaring hardware fault.
Official Sources
- 2GIG product page
- 2GIG Full Catalog English
- 10023748a x3 installandprogrammingguide
- 2GIG Edge Smart Home Manual 1
- 2GIG Edge User Guide 1
- 2GIG GC2 User Guide
- 2GIG GC2 User Guide FR
- 2GIG GC2 User Guide PO
- 2GIG GC2 User Guide SP
- 2GIG GC2 User Guide TU
Use official 2GIG PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Need more help with this model?
We have not published model-specific troubleshooting for the 2GIG Takeover Module (TAKE1) yet. The manufacturer's installation and user manuals are the most reliable source for wiring, programming, and trouble codes.